关于水泥检查井模具的详细介绍是为了满足对于水泥检查井不同样式、尺寸的生产要求，从水泥检查

井模具的全部知识里面，可以很好的看到其钢板使用如何、模具整体外形结构、内外模分块数量等等

，这些是构成整套检查井模具的基本组成要素。不管是水泥检查井还是其他类型的检查井，情况都是

如此。关于水泥检查井模具的详细介绍是按照模板的构成以及使用而言，因为水泥检查井模具目前的

定制量非常大，水泥检查井的制作除了依靠预制完成外，还有的需要直接在现场进行混凝土的浇筑作

业。

The detailed introduction of the cement inspection well mold is to meet the production

requirements for different styles and sizes of the cement inspection well. From all the

knowledge of the cement inspection well mold, you can see how to use the steel plate, the

overall shape structure of the mold, the number of blocks of the internal and external

mold, etc. These are the basic elements of the whole inspection well mold. This is true

for both cement manholes and other types of manholes. The detailed introduction of the

cement inspection well mould is based on the composition and use of the formwork. Because

the cement inspection well mould is currently customized greatly, the production of the

cement inspection well not only depends on prefabrication, but also needs to directly

carry out concrete pouring on site.

水泥检查井模具是专门生产水泥检查井的模板，这种模板的构成全部使用钢板焊接的方式，每天模板

的重量依据不同规格大小而不同，所以模板的价格也是所有区分。在水泥检查井钢模具的生产中，要

注意采取何种拆模方式，过去统一使用拔模的方法，但是这种拆模方式很容易造成内模的损害，而且

长时间下去容易造成模具变形。现在统一采用的拆卸形式是内模分块，外模分块的结构，这样拼接在

一起使用螺丝紧固，可以有效的提高模具使用率。

The cement inspection well mold is a special template for the production of cement

inspection well. The composition of this template is all welded by steel plate. The

weight of the template varies according to different specifications every day, so the

price of the template is also differentiated. In the production of steel molds for cement

inspection wells, attention should be paid to the mode of formwork removal. In the past,

the method of formwork drawing was used uniformly, but this mode of formwork removal is

easy to cause damage to the internal formwork, and it is easy to cause mold deformation

for a long time. At present, the unified disassembly form is the structure of internal

mold block and external mold block. In this way, they are spliced together and fastened

with screws, which can effectively improve the utilization rate of the mold.